Working with ZRANSOM jobs

To work with ZRANSOM subsystem's jobs, select 5. Work with Subsystem ZRANSOM jobs from the Activation screen (STRAR > 51) as shown in Starting Anti-Ransomware. The Work with Sub system Jobs screen appears:

​                           ​ Work with Subsystem Jobs​                  ​ RLDEV   ​ 
 ​  ​       ​  ​                                     ​ 12/02/25​ ​ 12:58:29 UTC+02:00S​ 
​ Subsystem  . . . . . . . . . . :​  ​ ZRANSOM   ​                                  
                                                                                
​ Type options, press Enter.​                                                     
  ​ 2=Change​  ​ 3=Hold​  ​ 4=End​  ​ 5=Work with​  ​ 6=Release​  ​ 7=Display message​      
  ​ 8=Work with spooled files​  ​ 13=Disconnect​                                    
                                                                                
                                                                                
​ Opt​ ​ Job​        ​ User​       ​ Type​    ​ -----Status-----​ ​ Function​               
​   ​  ​ TPSNDBOX  ​ ​ SECURITY5P​ ​ AUTO   ​ ​ ACTIVE ​ ​        ​ ​ PGM-TPSNDBOX  ​         
​   ​  ​ TPSRV     ​ ​ SECURITY5P​ ​ AUTO   ​ ​ ACTIVE ​ ​        ​ ​ PGM-TPSRV     ​         
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                              ​  ​  ​       Bottom​ 
​ Parameters or command​                                                          
​ ===>​                                                                          ​ 
​ F3=Exit​     ​ F4=Prompt​  ​ F5=Refresh​  ​ F9=Retrieve​  ​ F11=Display schedule data​  
​ F12=Cancel​  ​ F17=Top​    ​ F18=Bottom​                                            
                                                                                
​

Option	Description
2=Change	Runs the Change Job (CHGJOB) command. If no value is specified on the Parameters input field, default parameters are shown when you press the F4 (prompt) key.
3=Hold	Hold the job. The job's spooled files are not held unless the default for the Hold spooled files (SPLFILE) parameter is overridden using the Parameter's input field.
4=End	Runs the End Job (ENDJOB) command.
5=Work with	Runs the Work with Job (WRKJOB) command, which displays the Work with Job Menu.
6=Release	Runs the Release Job (RLSJOB) command, which releases the job if it is in the held condition. The Release Reader (RLSRDR) or Release Writer (RLSWTR) command (with OPTION(*CURRENT)) is run if this option is selected for a spooling reader or spooling writer job. 'Rls' is placed in the status field if the command runs successfully.
7=Display message	Displays the message for which the job is waiting.
8=Work with spooled files	Runs the Work with Job (WRKJOB) command, which displays the jobs' spooled output files.
13=Disconnect	Use this option to run the Disconnect Job (DSCJOB) command. All jobs at the device will be disconnected.

Type options and press Enter.

NOTE: Additional information on the ZRANSOM subsystem, TPSNDBOX and TPSRV jobs is available in ZRANSOM Subsystem and Its Jobs.